PayDotCom Forum

A community of marketers dedicated to success online!
It is currently Tue Sep 19, 2017 7:22 pm

All times are UTC - 7 hours

Post new topic Reply to topic  [ 1 post ] 
Author Message
 Post subject: Asphalt pavement process
PostPosted: Thu May 18, 2017 8:03 pm 

Joined: Wed Jul 13, 2016 4:33 pm
Posts: 3877
<P>Paver is also an indispensable part of road maintenance equipment, for the daily maintenance and maintenance of the paver, most people may not be very familiar with the relative excavator,[url=]road repair machine crack filling[/url] the paver is a relatively small product, no Too many people to discuss its maintenance, for the daily maintenance of the paver is to improve its service life and the use of an important condition. Daily work and maintenance should refer to the instructions specified in the use of instructions to carry out special needs should be replaced by maintenance.</P>
<P>Check the oil and lubrication system, see oil, fuel, coolant and hydraulic oil is sufficient, whether the quality meets the requirements, the parts with or without leakage, if necessary, should be added or replaced. Check whether the central grease pump is working, whether the grease is sufficient and its piping is clear. (No central grease pump models must be every working day to give the whole grease grease 3 times within 10 hours,[url=]road construction machinery ltd[/url] before and after the operation, then fill; if the working time exceeds 10 hours to 4 to 5 Times, in the operation plus 1 or 2 times.)</P>
<P>Always clean the paver and check the electricity, gas and heating systems. To clear the surface of the paver asphalt, sticky sand, etc., to remove the engine, hydraulic components and other parts of the surface of the old oil, dust debris, dirt, etc .; check and clean the air filter; check all kinds of wearing parts and Easy to aging parts, when necessary to give timely adjustment or replacement; the electrical system, fuses, lines and electrical connectors are intact, whether the loose; before each operation are allowed to work on the idle device,[url=]bitumen emulsion plant suppliers[/url] check the working device is running ; Also check the heating system of the nozzle, connecting pipe, cylinder and the switch is normal. Check the connection fastening of the paver. Including the connection is firm and intact, in particular to ensure that the left and right crawler beam, screed, the feeder device, and the scraper conveyor fastening. Check the tension of the drive belt and chain and its wear.</P>

bar furniture for the home

Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 1 post ] 

All times are UTC - 7 hours

Who is online

Users browsing this forum: No registered users and 3 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group